Brumby 115mm Zirconia Flap Disc 120G
For stock and weld removal, grinding and clean-up work.
Brumby Zirconia Flap Discs are ideal for use in stock and weld removal, plus grinding and clean-up work on aluminium, steel, cast iron and most metals.
Flap Discs have primarily been designed to replace sanding discs. No backing pads are required with Brumby flap discs – they fit directly onto your angle grinder. Due to the cushioning effect of the cloth, a disc one or two grades coarser can be used for maximum rate of stock removal and still achieve a finer finish than what would be obtained with a sanding disc. Grinding marks are less likely to show through paint, epoxy or stove enamel coatings.
Flap Discs work best with light pressure, letting the speed of the machine do the work rather than the operator, as the laminated flaps stay sharp until the disc is completely worn out.
Specifications
Part number: BDZ115120
Barcode: 9314028241477
Size: 115mm
Grit: 120
Bore: 22mm
Material Type: Zirconia
Max RPM: 13,300
Suitable tools
Brumby Zirconia Flap Discs are ideal for use in stock and weld removal, plus grinding and clean-up work on aluminium, steel, cast iron and most metals.
Flap Discs have primarily been designed to replace sanding discs. No backing pads are required with Brumby flap discs – they fit directly onto your angle grinder. Due to the cushioning effect of the cloth, a disc one or two grades coarser can be used for maximum rate of stock removal and still achieve a finer finish than what would be obtained with a sanding disc. Grinding marks are less likely to show through paint, epoxy or stove enamel coatings.
Flap Discs work best with light pressure, letting the speed of the machine do the work rather than the operator, as the laminated flaps stay sharp until the disc is completely worn out.
Specifications
Part number: BDZ115120
Barcode: 9314028241477
Size: 115mm
Grit: 120
Bore: 22mm
Material Type: Zirconia
Max RPM: 13,300
